Street sweepers: Engiro GmbH

Electric motors for street and off-road cleaning

In the municipal sector, in densely populated areas or narrow streets, in the aftermath of major events where clean air is urgently required, sweepers with electric drives provide applications that know no alternatives.

Street sweeper 96 V
Street sweeper 400-700 V

Traction motors

ENGIRO supplies traction motors from 48 V to 700 V and a power range from 5 to 340 kW. The motors are either combined with various gear units or used for direct propulsion. On request, propulsion systems can be tested according to ECE Regulation No. 85 (with certificate). Our propulsion systems are used in vehicles from 2 to 26 tons.

Hydraulic motors

ENGIRO supplies hydraulic motors from 48 V to 700 V and a power range from 5 to 120 kW. To facilitate direct mounting of the various pump sizes to the motor without coupling, we provide different flanges according to ISO 3019-1 and shafts according to ANSI B 92.1 with 9T, 13T or 15T gearing. In many cases, the scope of delivery also includes a motor control (converter). This controller is fully set up on our own test benches, with respective data sets adjustable to customer-specific requirements. Here we can also implement sensorless systems.

Fan motors and brush motors

Our fan motors feature special bearings to absorb the axial and radial forces of the suction fan. In addition, the motors are ideally suited for operation in dusty environments due to their IP6K9K protection class.

Water pump motors

In terms of water pump motors, ENGIRO supplies motors up to 30 kW rated power. They are connected directly to the pumps by means of a coupling.

Download

1. Data sheet 159AH_06020_ABC (PDF)

Street sweeper 96 V
Street sweeper 400-700 V

Traction motors

ENGIRO supplies traction motors from 48 V to 700 V and a power range from 5 to 340 kW. The motors are either combined with various gear units or used for direct propulsion. On request, propulsion systems can be tested according to ECE Regulation No. 85 (with certificate). Our propulsion systems are used in vehicles from 2 to 26 tons.

Hydraulic motors

ENGIRO supplies hydraulic motors from 48 V to 700 V and a power range from 5 to 120 kW. To facilitate direct mounting of the various pump sizes to the motor without coupling, we provide different flanges according to ISO 3019-1 and shafts according to ANSI B 92.1 with 9T, 13T or 15T gearing. In many cases, the scope of delivery also includes a motor control (converter). This controller is fully set up on our own test benches, with respective data sets adjustable to customer-specific requirements. Here we can also implement sensorless systems.

Fan motors and brush motors

Our fan motors feature special bearings to absorb the axial and radial forces of the suction fan. In addition, the motors are ideally suited for operation in dusty environments due to their IP6K9K protection class.

Water pump motors

In terms of water pump motors, ENGIRO supplies motors up to 30 kW rated power. They are connected directly to the pumps by means of a coupling.

Download

1. Data sheet 260W_28008_SFR (PDF)
2. Data sheet 205W_08095_CDR (PDF)
3. Data sheet 205W_08095_BCN (PDF)
4. Data sheet 205W_08095_SSN (PDF)

Other applications

Construction machines

Construction sites in conurbations, wheel loaders in the agricultural or food sector, in waste disposal and infrastructure can prevent unnecessary air pollution for people and the environment through the use of electric drives.

Refuse collection vehicles

Municipal vehicles – when electrically powered – can make an enormous contribution to noise reduction, air pollution control and image enhancement, especially in inner-city areas.